Here at Steele Rubber Products, we understand how important it is to cater to the do-it-yourself crowd. Our company was born out of our founder’s own garage, where he crafted parts for himself and his friends. This means we have a special place in our hearts for those who take on projects at home.
That’s why we make sure to offer everything you need for your projects. Alongside our weatherstripping and rubber parts, we also provide a wide range of adhesives, cleaners, and sealers. These products have been carefully selected and tested by our team, so you can trust that they will deliver reliable and effective results.
Below, we’ll provide detailed information about each item we offer. This way, you’ll have the knowledge and confidence needed to choose the right products for your next project. All the items below can be found on our website with the included links, or you may also find a few at your local auto parts store.
3M Super Weatherstrip Adhesive – Black
Steele part number: 96-8008-96
3M part number: 08008
This amazing product is designed specifically to bond seals and gaskets to metal. It forms a flexible, vibration-resistant, waterproof bond for the weatherstripping around the doors, trunk, T-tops, sunroofs and windows.
It also:
- Permanently bonds to a variety of surface types including rubber, fabrics, gaskets, seals and metal.
- Is ready to use right out of the tube.
- Resists oils, solvents, detergents, and temperature changes.
- Is fully cured in 24 hours.
Wait the full 24 hours before shutting doors or trunks after gluing with weatherstrip adhesive. The seal can slide out of place if not fully cured.
This is our go-to adhesive for every weatherstripping installation.
Additional things you should know before using this product:
- Proper surface prep is a MUST for optimal adhesion when using this or any other adhesive.
- You need to apply this properly if you want it to work as promised. There is a right and wrong way to do this. Check out this video for specific step-by-step instructions.
- A little goes a long way. We offer a big 5 oz. tube (will probably get you through a whole vehicle) or a small 2 oz. tube (for a single part or two).
- If you’re doing a points restoration, check to see if you should be using black adhesive or yellow. We also offer the yellow version for this purpose.
- To control where the adhesive goes, we recommend putting small amounts on a paper plate, piece of cardboard, etc., then using a popsicle stick to spread it on the surface.
- We also offer 3M Weatherstrip Adhesive (not super) which is designed to bond rubber weatherstripping together.
Weatherstripping adhesive should not be used when installing glass gaskets. Instead, scroll down to see part 96-8693-96.
Loctite Super Bonder 495
Steele part number: 96-0495-96
Loctite part number: 495
Loctite 495 is a transparent, low viscosity, general purpose instant adhesive designed to bond materials like rubber, plastic, and metal together. This adhesive does not just glue things together, it bonds them.
We recommend this for joining the ends together when creating a custom gasket. Check out our article, How to Make a Custom Gasket for Your Build, for more details.
Things you should know:
- This is an instant adhesive! You only get one chance to line things up correctly, so do a test fit first.
- Works for both sponge and dense rubber.
- A little goes a long way. We normally apply this with the end of a paperclip. Use a thin coat over the entire surface you’re trying to bond.
- If you notice smoke when you apply it, don’t worry! It’s the chemical reaction actually bonding the two pieces together.
CRL Windshield & Body Sealant
Steele part number: 96-8509-96
CRL Windshield & Body Sealant is an economical, non-hardening, water resistant product formulated for use as a sealant and bedding compound. It is designed specifically for creating a watertight seal between a glass rubber gasket and the vehicle body.
We recommend this for use when installing windshields, back glass, quarter glass or any window in a car, truck or hot rod that uses a gasket. Check out our article, The Secret to a Leak Free Windshield on Your Classic, for more details.
Things you should know:
- Has non- sagging properties making it great for vertical and overhead applications.
- It’s a one-part sealer so there’s no mixing required.
- Comes in a caulking tube for easy application.
- Won’t harden or crack EVER.
3M Urethane Adhesive
Steele part number: 96-8693-96
3M part number: 08693
3M Urethane Adhesive is a fast-curing, medium viscosity, urethane adhesive. Formulated for windshield bonding and stationary glass attachment, this product also can be used to mount things like backlights, side lights, and even beltline weatherstripping.
Things you should know:
- It cures rapidly to product high bond strength.
- Engineered with non-sag properties for easy and clean application.
- Adhesive properties meet many application strength requirements.
Urethane adhesive is meant to be used directly between the glass and metal on vehicles when installing glass. For more details, see our blog article, Restoration Essentials: Butyl Tape vs. Urethane Adhesive?
3M Adhesive Remover Low VOC
Steele part number: 96-3618-96
3M Adhesive Remover is a liquid, petroleum based solvent that removes remnants left from adhesives. It’s an excellent option to help dissolve and remove dirt, grease, tar, and many non-curing type adhesives.
This remover is ideal for surface prep before installing new weatherstripping!
Things you should know:
- Wipes away with just a shop towel without leaving a residue.
- Will not harm most automotive paint surfaces and works on glass or vinyl.
3M Plastic and Emblem Adhesive
Steele part number: 96-8061-96
3M part number: 08061
3M Plastic and Emblem Adhesive is a solvent-based adhesive that resists environmental elements like water and heat to maintain a solid bond. It permanently bonds plastic and metal emblems, rigid plastic parts, taillight lenses, trim strips, and other parts for both interior and exterior applications.
- Dries clear so it can be used to bond transparent or translucent plastics.
- A quick-acting formula. Has a working time of approximately 10-30 seconds, sets in approximately 15 minutes and fully cures in 24 hours.
- Automotive paint must be fully cured.
3M Rubberized Undercoating
Steele part number: 96-3584-96
3M part number: 03584
3M Rubberized Undercoating is a textured finish, spay-on undercoating that helps protect the undercarriage of cars, trucks, vans, and recreational vehicles from corrosion and abrasion.
We recommend it for protecting automotive undercarriages, wheel wells, fenders, quarter panels and more. We also love it for its sound deadening properties in those same locations.
Things you should know:
- Helps deaden noise for a quieter ride.
- Resists chipping, abrasion, exterior rusting, and weathering.
- Goes on as a textured black finish.
By offering a diverse selection of adhesives, cleaners, and sealers, our goal is to support and empower do-it-yourself enthusiasts in their endeavors. So whether you’re working on a small home project or a complete restoration, we have the right products to help you achieve the best results.
At Steele, we’re more than just high-quality products, we’re your trusted resource for completing your weatherstripping projects with confidence.
Whether you’re working on a classic car or truck, street rod, RV, or boat, our expert team is here to help. If you have questions about weatherstripping or need product guidance, we’re just a call or click away.
📞 Call us at 800-650-4482
📧 Send us an email
💬 Chat with us live on our website
Need installation help?
Check out our How-To video series on YouTube for step-by-step guidance and tips.
Stay connected!
Follow us on Facebook and Instagram for updates, inspiration, and more.
Steele Rubber Products 