Tag Archives: weatherstrip

How to Remove and Replace Door Clinch Seal on a Truck

Clinch seal type weatherstripping was developed by auto manufacturers to speed up installation of the door seals on the assembly line. Clinch seals use no glue but are simply pressed on to the pinch-weld area of the door opening. They prevent water, wind and other harmful elements from damaging the carpet and interior of your

Read More

How To Determine the Gap Size on your Weatherstrip

When it comes to your classic car, truck or hot rod Steele has weatherstripping for all applications. For a lot of vehicles, there are OEM replacements that fit like originals and you can simply order those, install them and you’re all sealed up and ready to go! But some folks have a car that didn’t

Read More

New Parts- June/July 2018 Door Weatherstrips, Discounted Kits and More!

We’ve recently beefed up our research and development efforts in order to add to our parts offerings here at Steele! We are pouring over customer requests, vehicle data and the current trends and we are excited to announce 23 new parts this month- with many more to come! New Parts: Push on Style Door Seal–

Read More

How to Glue Automotive Weatherstrip the Right Way

Weatherstripping is not a fun or sexy part of auto restoration but adds a lot to the look and functionality of your vehicle! Using quality products and installing them properly can ensure that your interior is protected from the elements, that your vehicle looks good and you have a nice quiet ride for many years

Read More

New Parts- May 2018

Protect your vehicle’s interior and ensure a quiet ride by sealing it up right with these NEW fixed rear side window weatherstrips from Steele! Fixed Rear Quarter Window Weatherstrip for 1955-59 Chevy and GMC Suburban This fixed rear quarter window weatherstrip set contains two (2) seals for the fixed windows on the rear quarter of

Read More

1969-72 GM A-bodies Body Weatherstrip Kit (90-3301-90)

This kit is for the body components of 69-72 GM A-bodies except for Chevelle. This seventeen (17) piece kit includes the major weatherstrip components needed for your restoration project. These parts are designed from originals with fully molded corners and end pieces for superior performance and factory fit. Part Number- 90-3301-90 This Kit is composed

Read More

Side Bulb Push-On Seal (70-3855-99)

Side bulb push-on seal. Manufactured with a flexible steel spine and sponge rubber side extrusion. Designed to be pushed on to a flange and held in place by the inner rubber lips. Part Number– 70-3855-99 Steele Rubber Products manufactures and supplies automotive restoration rubber parts and weatherstripping for American-made cars, trucks and street rods. With

Read More

Peel-N-Stick Wiper Seal (70-3856-99)

High quality dense rubber seal, for a variety of uses. Features a plastic-like base that can accept screws if desired. Available by the foot. Adhesive backed. Part Number– 70-3856-99 Steele Rubber Products manufactures and supplies automotive restoration rubber parts and weatherstripping for American-made cars, trucks and street rods.  With over 12,000 parts available, Steele offers quality

Read More

Peel-N-Stick Large Hollow Half Round (70-3859-99)

High quality sponge rubber seal, for a variety of uses. Available by the foot. Adhesive backed. Part Number– 70-3859-99 Steele Rubber Products manufactures and supplies automotive restoration rubber parts and weatherstripping for American-made cars, trucks and street rods.  With over 12,000 parts available, Steele offers quality rubber parts for vehicles from the 1920’s through the 2000’s. In

Read More

Peel-N-Stick Snap-N-Seal Wiper Seal (#70-3865-99)

The Snap-N-Seal slide out seal has a unique, universal design that can replace almost any seal configuration. There is a hinging section, that has an adhesive back, that allows screws to be placed for extra security. The bulb section is then snapped over to cover the screws and provide a seal for when the slide-out

Read More