For more than 60 years we’ve been committed to delivering quality products and our passion is helping you restore the car of your dreams. Every month we do our best to add new parts so we can help more people get their ride #SealedWithSteele!
Every part purchased from Steele comes with our 100% Satisfaction Guarantee so you can buy with confidence.
1961-63 Lincoln Continental
Windshield Gasket (Sedan Only)
This Windshield Gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit.
Note: This Windshield Gasket is slotted at top for a reveal molding.
- Fitted gasket provides a formed, seamless seal.
- Designed from the original part to fit correctly.
- Replaces factory #C1VB-5703110-B and #C3VY-5703110-B
- Made in the USA!
Package Tray to Quarter Panel Seal (Convertible Only)
This convertible Package Tray Panel To Quarter Panel Seal is designed from the original part for superior fitment and seal. This left (LH) and right (RH) seal pair fits between vehicle body quarter panel and rear package tray.
Note: For Convertibles built after 8-31-1961.
- Fully molded from top quality EPDM sponge rubber to ensure durability and proper seal.
- Reproduction is designed from the original part to fit correctly.
- Part measures 10-1/4″ Long x 7/8″ Wide.
- Replaces factory #C2VY-7427738-A (RH) and #C2VY-7427739-A (LH).
- Made in the USA!
Front Body Upper Pillar Drain Trough (All models)
This Front Body Upper Pillar Drain Trough pair is designed from the original part for superior fitment and seal. This left (LH) and right (RH) drain trough pair fits above the front upper door hinge, one per side.
- Fully molded from top quality EPDM dense rubber and corrosion resistant brass metal cores to ensure durability and proper seal.
- Reproduction is designed from the original part to fit correctly.
- Replaces factory #C1VB-57025A10-B (RH) and #C1VB-57025A11-B (LH).
- Made in the USA!
Rear Upper Door Seal (All models)
This Rear Door Window Upper Seal pair is designed from the original part for superior fitment and sealing. This rectangular shaped seal pair mounts to the rear door at the upper front and over the rear side window.
- Fully molded from top quality dense rubber with corrosion resistant brass metal cores to ensure durability and proper seal.
- Reproduction is designed from the original part to fit correctly.
- Part measures 3-1/4″ x 1-1/2″ inches.
- Installation hardware is not included
- Replaces factory #C1VB-57247A10-A.
- Made in the USA!
1967-70 Chevy/GMC Van
Windshield Gasket
This windshield gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit. This gasket has NO Trim Groove for decorative molding
- Fitted gasket provides a formed, seamless seal and accommodates reveal molding.
- Designed from original part so it fits correctly.
- Made from top quality rubber to ensure durability and proper seal.
1967 Chevy Corvette
Splash Apron / A Arm Dust Shield Filler
This two (2) piece Splash Apron / A-Arm Dust Shield Filler pair is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions.
Pieces fit over suspension a-arms and inside front inner fenders.
- Includes all factory style holes required for installation.
- Installation staples are included.
Note: This Splash Apron / A-Arm Dust Shield Filler pair is specifically designed for 1967 Corvette only.
1967-68 Chevy Camaro
Rally Sport Paint Gasket Supplement Set
This six (6) piece Rally Sport Camaro Paint Gasket Supplement set contains the RS specific parking light and reverse light gaskets. These reproduction parts are designed from originals for superior performance, durability and a factory fit.
This Rally Sport Paint Gasket Supplement Set is composed of the following parts:
- Two (2) Parking Light Lens Gaskets
- Two (2) 1967 Parking Light Housing Gaskets
- Two (2) Back Up Light Lens Gaskets
1973-84 Chevy/GMC Truck
Paint Gasket Set
This Paint Reseal Gasket Kit contains like original design reproductions for the vehicles specific exterior pieces. These reproductions are die-cut from quality materials to the original design for superior performance, durability, and a factory like fit. A great update when doing a vehicle re-paint project.
- Manufactured from top quality materials to ensure durability and proper seal.
- Reproduction is designed from the original part to fit correctly.
1958-60 Edsel
Master Parts List
This 1958-1960 Edsel Master Parts List is a high quality reproduction of the exact manual originally published by Ford / Edsel to be used by their dealer mechanics. The manual contains detailed part related information for all vehicle major subsystems.
This new print manual is reproduced using the highest quality scanner and digital printer available for a high quality reproduction of the original OEM Parts manual.
- Binding: Paperback- 8.5 x 11 inches
- Pages: 944- with hundreds of photos and diagrams in black & white
- Paper: 50# paper acid & chlorine free
- Publisher: Ford Motor Company / Reproduced Under License by Detroit Iron
For price and availability for these new parts, or to see if we have the parts you need for your classic car, truck or hot rod, visit our website at www.steelerubber.com/automotive!
Is there a rubber or weatherstripping part you’re looking for but can’t find anywhere? Let us know! Customer requests are how new parts are born here at Steele.
