For more than 60 years we’ve been committed to delivering quality products and our passion is helping you restore the car of your dreams. Every month we do our best to add new parts so we can help more people get their ride #SealedWithSteele!
Every part purchased from Steele comes with our 100% Satisfaction Guarantee so you can buy with confidence.
1955-56 Dodge & Plymouth Sedans
This Front Door Vent Window Weatherstrip set is a four (4) piece set that contains the main vent window seals and division post seals. These seals are molded as left and right and are installed into the vent window frame. All of the pieces were designed from original parts for a precise, factory fit.
This Set is composed of the following parts:
- 1 pr. Front Door Vent Window Weatherstrips 70-2083-55
- 1 pr. Vent Division Bar Weatherstrip 70-4333-56
Ford Bronco
We’ve added more parts for the SUV you love- the Bronco!
This front door Vent Window Weatherstrip pair is designed from the original part for superior fitment and seal. A two (2) piece pair that fits both driver (Left) and passenger (Right) front doors of the vent / wing window assemblies.
- Fully molded from top quality dense rubber to ensure durability and proper sealing.
- Reproduction is designed from the original part to fit correctly.
- Includes two (2) main vent window seals and two (2) division post seals.
- Installs into the vent window frame.
- Hardware is not included.
- Replaces factory #C6TZ-9721448 and C6TZ-9721450.
This Windshield Frame Upper (Header) Weatherstrip is designed from the original part for superior fitment and sealing. Made of a high-quality EPDM dense rubber as the original. This windshield frame upper weatherstrip mounts to seal between the windshield frame and hardtop of the vehicle.
This weatherstrip comes with pre-cut mounting holes and works with electric or vacuum wipers.
- Reproduction part is designed from original so it fits correctly.
- Replaces factory #C6TZ-9703114-A.
This Windshield Frame To Body Lower Weatherstrip is designed from the original part for superior fitment and sealing. This is the lower windshield frame hinge Weatherstrip. It mounts to seal between the windshield frame and the cowl with the bead facing to the inside of the vehicle.
Made of a high-quality EPDM dense rubber as the original.
- Reproduction part is designed from original part so it fits correctly.
- Replaces factory #C6TZ-9603828-A.
This Rear License Plate Bracket Bumper is designed from the original part for superior fitment and function. This OEM exact copy reproduction bumper mounts in the spring retainer on the license plate bracket.
- Fully molded from top quality EPDM dense rubber to ensure durability.
- Reproduction is designed from the original part to fit correctly.
- Replaces factory #C6TZ-17A396-A.
This complete Door Glass Weatherstrip set is designed from the original part for superior fitment and seal. The anti-rattler set includes the back edge of vent window seal installed, beltline weatherstrips (clips included, not installed), door glass runs with rivets and original-type vent bar channel (without brackets).
- Assembled with back edge of vent window seal and brackets.
- Complete reproduction set designed from original parts so it fits correctly.
- Each kit does both doors.
- Brackets are not included / Reuse the originals.
- Ready to install.
This set includes the following parts:
- 2 pr. Door Glass Beltline Weatherstrips – Inner & Outer Door Edge – w/Clips.
- 2 ea. Door Glass Runs Upper & Backside.
- 2 ea. Door Glass Runs Lower Rear.
- 2 ea. Division Bars (without Brackets) – Upper Front.
- 2 ea. Division Bar (without Brackets) – Lower Front.
This reproduction Brake OR Clutch Pedal Pad slips over the full perimeter of the brake or clutch pedals for a precise, factory fit. Replaces original brake or manual transmission clutch pedal pads. Manufactured with a thick, quality rubber construction and features the Bronco script and bucking bronco.
- Fully molded using a high-quality dense rubber to ensure a durable positive fit.
- Designed from the original for an exact reproduction.
- Pedal pads are a slipover fit with no adhesive required to install.
- Replaces factory number C6TZ-2457-BC.
Fitment Note
Note: Fits all Bronco models with a manual transmission.
This reproduction Brake Pedal Pad slips over the full perimeter of the brake pedal for a precise, factory fit. Replaces original brake pedal pad for automatic transmissions with power brakes. Manufactured with a thick, quality rubber construction and an embossed with the Bronco script and bucking bronco.
- Fully molded using a high-quality dense rubber to ensure a durable positive fit.
- Designed from the original for an exact reproduction.
- Pedal pad is a slipover fit with no adhesive required to install.
- Replaces factory #D6TZ-2457-BC.
Fitment Note
Note: Fits all Ford Bronco models with an automatic transmission.
Ford F-Series Trucks
We’re adding more to our product line up for these increasingly popular generations of trucks built Ford tough.
This complete Door Glass Weatherstrip set is designed from the original part for superior fitment and seal. The anti-rattler set includes the back edge of vent window seal installed, beltline weatherstrips (clips included, not installed), door glass runs with rivets and original-type vent bar channel with brackets riveted in place.
- Assembled with back edge of vent window seal and brackets.
- Complete reproduction set designed from original parts so it fits correctly.
- Each kit does both doors.
- Brackets are not included / Reuse the originals.
- Ready to install.
This set includes the following parts:
- 2 pr. Door Glass Beltline Weatherstrips with Black Bead (clips included, not installed).
- 1 pr. Door Glass Runs w/Clips Installed.
- 1 ea. Right Hand Division Bar (Without Bracket).
- 1 ea. Left Hand Division Bar (Without Bracket).
This Windshield Molding Joint Cover is designed from the original part for superior fitment and usage. This made from Stainless Steel piece covers the molding joint where the Windshield rubber comes together with Wide Moldings.
- Designed from original part so it fits correctly.
- Takes two (2) covers per windshield.
- Replaces factory #C7TZ-8103094-A.
This reproduction F-100 script Brake OR Clutch Pedal Pad slips over the full perimeter of the brake or clutch pedal for a precise, factory fit. Replaces original brake or manual transmission clutch pedal pads. Manufactured with a thick, quality rubber construction and features the Ford logo and F-100 molded into the pedal pad.
- Fully molded using a high-quality dense rubber to ensure a durable positive fit.
- Designed from the original for an exact reproduction.
- Pedal pad is a slipover fit with no adhesive required to install.
- Replaces factory #C3TZ-2457-F100.
Fitment Note
Note: Fits all Ford F-100 models with a manual transmission.
This reproduction F-100 Brake Pedal Pad slips over the full perimeter of the brake pedal for a precise, factory fit. Replaces original brake pedal pads for automatic transmissions. Manufactured with a thick, quality rubber construction and features the Ford logo and F-100 molded into the rubber.
- Fully molded using a high-quality dense rubber to ensure a durable positive fit.
- Designed from the original for an exact reproduction.
- Pedal pads are a slipover fit with no adhesive required to install.
- Replaces factory #D3TZ-2457-F100.
Fitment Note
Note: Fits all Ford F-100 models with an automatic transmission.
This reproduction F-150 Brake OR Clutch Pedal Pad slips over the full perimeter of the brake or clutch pedal for a precise, factory fit. Replaces original brake or manual transmission clutch pedal pads. Manufactured with a thick, quality rubber construction and features the Ford logo and F-150 molded into the rubber.
- Fully molded using a high-quality dense rubber to ensure a durable positive fit.
- Designed from the original for an exact reproduction.
- Pedal pads are a slipover fit with no adhesive required to install.
- Replaces factory #C3TZ-2457-F150.
Fitment Note
Note: Fits all Ford F-150 models with a manual transmission.
This reproduction F-150 Brake Pedal Pad slips over the full perimeter of the brake pedal for a precise, factory fit. Replaces original brake pedal pads for automatic transmissions. Manufactured with a thick, quality rubber construction and features the Ford logo and F-150 molded into the rubber.
- Fully molded using a high-quality dense rubber to ensure a durable positive fit.
- Designed from the original for an exact reproduction.
- Pedal pads are a slipover fit with no adhesive required to install.
- Replaces factory #D3TZ-2457-F150.
Fitment Note
Note: Fits all Ford F-150 models with an automatic transmission.
This side window Inner horizontal seal set (also known as beltline weatherstrip) is made with top quality materials. These strips wipe the side windows when the glass is lowered. They come ready to install with finished ends and body curvature bends for a factory like appearance.
This two (2) piece beltline set includes Only the Inner seals (the part sealing the inside of the vehicle) for the Rear Door Side Windows.
Fitment Note
Note: Inner Beltlines for the Left & Right Rear Doors of 4 Door Crew Cab pickup truck models.
This is an Original equipment style side window horizontal weatherstrip set (also known as beltline weatherstrip). This four (4) piece set includes inner and outer window felt beltline weatherstrips for each front door side window.
These strips wipe the side windows when the glass is lowered. They come ready to install with finished ends and body curvature bends for a factory like appearance and are made from original factory style material.
Fitment Note
Note: For Front Door Side Windows Only.
For price and availability for these new parts, or to see if we have the parts you need for your classic car, truck or hot rod, visit our website at www.steelerubber.com/automotive!
Is there a rubber or weatherstripping part you’re looking for but can’t find anywhere? Let us know! Customer requests are how new parts are born here at Steele.