For more than 60 years we’ve been committed to delivering quality products and our passion is helping you restore the car of your dreams. Every month we do our best to add new parts so we can help more people get their ride #SealedWithSteele!
Every part purchased from Steele comes with our 100% Satisfaction Guarantee so you can buy with confidence.
More Mustang parts!
1979- 93 Ford Mustang
Firewall to Hood Seal
This Firewall To Cowl Seal weatherstrip is designed from the original part for superior fitment and seal. This seal mounts with clips at the rear of the engine bay directly to the body.
- The 48-3/4” inch length strip provides complete coverage.
- Designed from original part with the proper cowl radius so it fits correctly.
- Mounts to vehicle cowl with ten pre-installed mounting clips.
- A replacement for factory #D9ZZ-16740-A
Cobra Clutch & Brake Pedal Pads
This reproduction Cobra Clutch & Pedal Pad pair mounts around the full perimeter of the brake and clutch pedals for a precise, factory fit. Replaces original pedal pads. Manufactured with a thick, quality rubber construction and an embossed striking Cobra emblem on each pad. Includes both Brake & Clutch pedal pads.
- Fully molded using a high-quality dense rubber to ensure a durable positive fit.
- Designed from the original for an exact reproduction.
- Pedal pads are a push-on slip fit with no adhesive required to install.
- Replaces factory #D9ZZ-2457
1994- 04 Ford Mustang & Cobra
Rear Window Lower Molding
This Rear Window Lower Molding is designed from the original part for superior fitment and seal. This rubber molding mounts to the rear lower part of the rear window clipping to the window with the metal inner core piece for a secure hold.
- Made from top quality rubber to ensure durability and proper seal.
- Designed with a metal core to hold the contour of the rubber.
- Push-on mounting to the glass in the space between the rear window glass and trunk lid
- A reproduction replacement for factory #F4ZZ-6342404.
Trunk Weatherstrip
This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
- Made from top quality rubber to ensure durability and proper seal.
- An exact reproduction designed from original part so it fits correctly.
- Fully bonded ends.
- Replaces factory #F4ZZ-6343720-A, F7ZZ-6343720-AA.
Ford’s Original listing shows that the F4ZZ & F7ZZ trunk weatherstrip for 1994-1998 was never replaced by the XR3Z 1999-2004 version. This reproduction unit will fit all 1994-2004 model years.
Parking Brake Cable to Floor Pan Boot
This Parking Brake Cable To Floor Pan Boot seal is designed from the original part for superior fitment and seal. This boot seal mounts by securely locking into the vehicle floor pan perfectly for the parking brake cable to pass through.
- Made from top quality rubber to ensure durability and proper seal.
- An exact reproduction of the original part to fit correctly.
- Securely mounts locking into the vehicle floor pan perfectly for the parking brake cable.
- Works with adjustable or non-adjustable cables.
- A replacement for factory #E7ZZ-2650
Cobra Clutch & Brake Pedal Pads
This reproduction Clutch or Pedal Pad mounts around the full perimeter of the brake or clutch pedal for a precise, factory fit. Replaces the original clutch or brake pedal pad. Pad is manufactured with a thick, quality rubber construction and deep grooves for a positive grip.
- Fully molded using a high-quality dense rubber to ensure a durable positive fit.
- Designed from the original for an exact reproduction.
- Pedal pads are a push-on slip fit with no adhesive required to install.
- Replaces factory #F4ZZ-2457-A
1994- 2009 Ford Mustang & Cobra
Cobra Clutch & Brake Pedal Pads
This reproduction Cobra Clutch & Pedal Pad pair mounts around the full perimeter of the brake and clutch pedals for a precise, factory fit. Replaces original pedal pads. Manufactured with a thick, quality rubber construction and an embossed striking Cobra emblem on each pad. Includes both Brake & Clutch pedal pads.
- Fully molded using a high-quality dense rubber to ensure a durable positive fit.
- Designed from the original for an exact reproduction.
- Pedal pads are a push-on slip fit with no adhesive required to install.
- Replaces factory #F5ZZ-2457
1971-77 Chevy Vega Hatchback and other GM H Body Hatchback Models
Swing Out Quarter Window Seal
Fits the following GM H Body Models:
- 1971-77 Chevy Vega Hatchback
- 1975-80 Buick Skyhawk Hatchback
- 1975-80 Chevy Monza Hatchback
- 1975-80 Oldsmobile Starfire Hatchback
- 1978-80 Pontiac Sunbird Hatchback
This Swing-Out Quarter Window Gasket mounts around the full perimeter of the rear side quarter window glass and has properly molded corners for a precise fit.
- Made from top quality rubber to ensure durability and proper seal.
- Fitted gasket provides a formed, seamless seal.
- A replacement gasket designed from the original part to fit correctly.
- Replaces factory #9876595 RH & #9876596 LH.
1968-72 Chevy Nova
Glass Run Channel
This flexible Glass Run Channel is designed from the original part for superior fitment and seal. This flexible window run channel is for the sides and top of door windows.
Pair of 96″ inch length strips provide complete coverage.
Made from top quality materials to ensure durability and proper sealing
Designed from original part so it fits correctly.
Universal
Top Bulb Push-On Seal
Top bulb push-on seal. Manufactured with a flexible steel spine and sponge rubber top extrusion. Designed to be pushed on to a flange and held in place by the inner rubber lips. Has a trim lip piece for a finished look.
This weatherstrip was designed as a Hood To Cowl Weatherstrip for some 1982-1994 GM models. With its generic shape, it has many uses outside of its original purpose.
Superior grade, 100% EPDM sponge rubber clinch seal extrusion designed to last- it will not fade, shrink or crack. Excellent at resisting moisture, Ozone and UV exposure. Optimal for replacing old, worn or damaged seals.
For price and availability for these new parts, or to see if we have the parts you need for your classic car, truck or hot rod, visit our website at www.steelerubber.com/automotive!
Is there a rubber or weatherstripping part you’re looking for but can’t find anywhere? Let us know! Customer requests are how new parts are born here at Steele.
Steele not only has all the products you need but all the knowledge you need to get the job done right, too. If you have questions about Rubber Parts or Weatherstripping on your Classic Car, Truck, Hot Rod or even your boat, trailer or RV, feel free to reach out to us! You can call us at 800-650-4482, contact us through our website or comment on this post and we’ll get you answers as quickly as possible. Check out our YouTube channel for our full library of how-to/installation videos.
